Juniper-ERX-System-MIB :: juniERXSysSlotControl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsJuniper-ERX-System-MIBjuniERXSysSlotControl

juniERXSysSlotControl

Module: Juniper-ERX-System-MIB

OID (symbolic): Juniper-ERX-System-MIB::juniERXSysSlotControl

OID (numeric): 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Administrative control of this slot: noOperation Setting this value has no effect. flush Flushes configuration associated with a card type that previously occupied this slot. Used to explicitly confirm that the slot is now empty, or contains a different card type. Card must be disabled when this value is asserted. See description for juniERXSysSlotDisableReason. reset Resets the slot. forceFailover Forces the slot to failover to backup. noBoot Deconfigure primary release file for the slot. noBootBackup Deconfigure backup release file for the slot.

What is juniERXSysSlotControl?

Issues an administrative action on this slot: flush clears the prior card-type association (only while the card is disabled), reset restarts the slot, forceFailover triggers failover to backup, and noBoot/noBootBackup deconfigure the primary or backup release file. Use flush specifically after swapping in a different card model to clear the stale juniERXSysSlotExpectedCardType association.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9
snmpwalk -v2c -c public <target> Juniper-ERX-System-MIB::juniERXSysSlotControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9.1
snmpget -v2c -c public <target> Juniper-ERX-System-MIB::juniERXSysSlotControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9.1 i <value>

Start monitoring Juniper Networks ERX-series broadband edge router (deprecated system MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ERX-System-MIB::juniERXSysSlotControl OID value, configure state conditions and alerts, and monitor any Juniper Networks ERX-series broadband edge router (deprecated system MIB) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.17juniERXSysMIBJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1juniERXSysObjectsJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4juniERXSysSlotJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4.2juniERXSysSlotTableJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4.2.1juniERXSysSlotEntryJuniper-ERX-System-MIB
1.3.6.1.4.1.4874.2.2.17.1.4.2.1.9juniERXSysSlotControlJuniper-ERX-System-MIB