All MIBs › Juniper-ERX-System-MIB › juniERXSysAbatedMemUtilThreshold
juniERXSysAbatedMemUtilThreshold
Module: Juniper-ERX-System-MIB
OID (symbolic): Juniper-ERX-System-MIB::juniERXSysAbatedMemUtilThreshold
OID (numeric): 1.3.6.1.4.1.4874.2.2.17.1.1.23
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on this system.
The value of this object must be less than the value of juniERXSysHighMemUtilThreshold.
The abated memory utilization trap is sent once if the high memory threshold was reached, and memory utilization falls to the value of this object.
What is juniERXSysAbatedMemUtilThreshold?
Sets the memory-utilization percentage (0-99) at which an abated (all-clear) trap fires after a high-utilization event, once usage falls back below this level; it must be set lower than juniERXSysHighMemUtilThreshold. Widen the gap between the two thresholds to avoid trap flapping if utilization hovers near the high threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.23 snmpwalk -v2c -c public <target> Juniper-ERX-System-MIB::juniERXSysAbatedMemUtilThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.17.1.1.23.1 snmpget -v2c -c public <target> Juniper-ERX-System-MIB::juniERXSysAbatedMemUtilThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.17.1.1.23.1 i <value>
Start monitoring Juniper Networks ERX-series broadband edge router (deprecated system MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ERX-System-MIB::juniERXSysAbatedMemUtilThreshold OID value, configure state conditions and alerts, and monitor any Juniper Networks ERX-series broadband edge router (deprecated system MIB) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.17 | juniERXSysMIB | Juniper-ERX-System-MIB |
| 1.3.6.1.4.1.4874.2.2.17.1 | juniERXSysObjects | Juniper-ERX-System-MIB |
| 1.3.6.1.4.1.4874.2.2.17.1.1 | juniERXSysGeneral | Juniper-ERX-System-MIB |
| 1.3.6.1.4.1.4874.2.2.17.1.1.23 | juniERXSysAbatedMemUtilThreshold | Juniper-ERX-System-MIB |