All MIBs › Juniper-AUTOCONFIGURE-MIB › juniAutoConfNextLockoutTime
juniAutoConfNextLockoutTime
Module: Juniper-AUTOCONFIGURE-MIB
OID (symbolic): Juniper-AUTOCONFIGURE-MIB::juniAutoConfNextLockoutTime
OID (numeric): 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The time duration, in seconds, that will be used to lockout the specified encapsulation type from recognition for the specified interface for the next event that results in a lockout condition. The reported value is within the range specified by juniAutoConfLockoutMin and juniAutoConfLockoutMax. When juniAutoConfEnable is set to enable, a value of 0 indicates that lockout is prevented from occurring for the encapsulation type for the specified interface (i.e., juniAutoConfLockoutMin and juniAutoConfLockoutMax are both set to 0).
What is juniAutoConfNextLockoutTime?
This read-only value, in seconds, reports the lockout duration that will be applied the next time a creation error triggers a lockout for this encapsulation type and interface, staying within the juniAutoConfLockoutMin/Max range; when autoconfiguration is enabled a value of 0 means lockout has been disabled for this pair. Admins use it to anticipate how the exponential backoff will escalate if the failure recurs. For example, seeing juniAutoConfNextLockoutTime climb from 4 to 8 seconds after a lockout event shows the exponential backoff doubling in response to repeated failures.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.9 snmpwalk -v2c -c public <target> Juniper-AUTOCONFIGURE-MIB::juniAutoConfNextLockoutTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.9.1 snmpget -v2c -c public <target> Juniper-AUTOCONFIGURE-MIB::juniAutoConfNextLockoutTime.1
Start monitoring Juniper Networks E-series broadband access routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-AUTOCONFIGURE-MIB::juniAutoConfNextLockoutTime OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series broadband access routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.48 | juniAutoConfMIB | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1 | juniAutoConfObjects | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1 | juniAutoConf | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1.1 | juniAutoConfTable | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1.1.1 | juniAutoConfEntry | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.9 | juniAutoConfNextLockoutTime | Juniper-AUTOCONFIGURE-MIB |