All MIBs › Juniper-AUTOCONFIGURE-MIB › juniAutoConfLockoutMin
juniAutoConfLockoutMin
Module: Juniper-AUTOCONFIGURE-MIB
OID (symbolic): Juniper-AUTOCONFIGURE-MIB::juniAutoConfLockoutMin
OID (numeric): 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The lower bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This only takes effect if juniAutoConfEnable is set to enable for the encapsulation type for this interface. The ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type is enabled by default. The initial lockout duration is this object's value and increases exponentially for each failure that occurs for the specified encapsulation type for the specified interface within the greater of 15 minutes and juniAutoConfLockoutMax. The lockout duration for the specified encapsulation type will not exceed juniAutoConfLockoutMax. If the time between creation errors for the specified encapsulation type for the specified interface is greater than the greater of 15 minutes and juniAutoConfigLockoutMax, then the lockout duration reverts to this object's value. To disable the ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type for the specified interface, the value of this object and juniAutoConfLockoutMax must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes.
What is juniAutoConfLockoutMin?
This read-write value, in seconds (0-86400, default 1), sets the lower bound and initial duration used to lock a misbehaving encapsulation type out of autoconfiguration recognition after a creation error, applicable only when juniAutoConfEnable is enabled; the lockout duration grows exponentially on repeated failures up to juniAutoConfLockoutMax and resets to this value if failures stop occurring for a while. Admins tune it to control how aggressively the router backs off from retrying autoconfiguration of a repeatedly failing encapsulation type. For example, setting both juniAutoConfLockoutMin and juniAutoConfLockoutMax to 0 disables the lockout feature entirely, which is recommended only for debugging.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5 snmpwalk -v2c -c public <target> Juniper-AUTOCONFIGURE-MIB::juniAutoConfLockoutMin
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5.1 snmpget -v2c -c public <target> Juniper-AUTOCONFIGURE-MIB::juniAutoConfLockoutMin.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> juniAutoConfLockoutMin.1
Start monitoring Juniper Networks E-series broadband access routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-AUTOCONFIGURE-MIB::juniAutoConfLockoutMin OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series broadband access routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.48 | juniAutoConfMIB | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1 | juniAutoConfObjects | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1 | juniAutoConf | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1.1 | juniAutoConfTable | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1.1.1 | juniAutoConfEntry | Juniper-AUTOCONFIGURE-MIB |
| 1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5 | juniAutoConfLockoutMin | Juniper-AUTOCONFIGURE-MIB |