All MIBs › Jetnet5010G › portCtrlSpeedAndDuplex
portCtrlSpeedAndDuplex
Module: Jetnet5010G
OID (symbolic): Jetnet5010G::portCtrlSpeedAndDuplex
OID (numeric): 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Speed and duplex configuraion.
Different speed and duplex modes are available. There are speeds: 1000 megabits per second (Gigabit Ethernet), 100 megabits per second (Fast Ethernet), and 10 megabits per second (Legacy Ethernet).
Full-duplex allows packets to be transmitted in both directions at the same time, while half-duplex allows a device to either transmit or receive, but not both at the same time. Full-duplex may have double bandwidth than half-duplex.
You can configure manually from the possible options, listed from best to worst: 1Gb full-duplex(7) 1Gb half-duplex(6) 100Mb full-duplex(5) 100Mb half-duplex(4) 10Mb full-duplex(3) 10Mb half-duplex(2)
Set to autoNegotiation(1) to allow the two interfaces on the link to exchange the capabilities and characteristics of the each side, and select the best operating mode automatically when a cable is plugged in.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4 snmpwalk -v2c -c public <target> Jetnet5010G::portCtrlSpeedAndDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4.1 snmpget -v2c -c public <target> Jetnet5010G::portCtrlSpeedAndDuplex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4.1 i <value>
Start monitoring Korenix JetNet industrial Ethernet rail switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Jetnet5010G::portCtrlSpeedAndDuplex OID value, configure state conditions and alerts, and monitor any Korenix JetNet industrial Ethernet rail switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.24062 | korenix | Jetnet4508V2 |
| 1.3.6.1.4.1.24062.2 | products | Jetnet4508V2 |
| 1.3.6.1.4.1.24062.2.2 | managedFESwitch | Jetnet4508V2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.24062.2.2.1 | jetnet5010G | Jetnet5010G |
| 1.3.6.1.4.1.24062.2.2.1.3 | portConfiguration | Jetnet5010G |
| 1.3.6.1.4.1.24062.2.2.1.3.1 | portControl | Jetnet5010G |
| 1.3.6.1.4.1.24062.2.2.1.3.1.1 | portCtrlTable | Jetnet5010G |
| 1.3.6.1.4.1.24062.2.2.1.3.1.1.1 | portCtrlEntry | Jetnet5010G |
| 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4 | portCtrlSpeedAndDuplex | Jetnet5010G |