Jetnet5010G :: portCtrlFlowControl

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Jetnet5010G › portCtrlFlowControl

portCtrlFlowControl

Module: Jetnet5010G

OID (symbolic): Jetnet5010G::portCtrlFlowControl

OID (numeric): 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Flow control configuration.

Flow control is used to throttle the throughput rate of an end station to avoid dropping packets during network congestion. If flow control mode is not set and if there is no packet buffer space available, the incoming packets are discarded.

Symmetric Flow Control stops and restarts packet transmission by transmitting and receiving pause frames. When a port's free buffer space is almost empty, the device send out a Pause frame to stop the remove node from sending more frames into the switch. When congestion on the port is relieved, the device send out a Pause frame with pause time equal to zero, making the remove node resume transmission.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5
snmpwalk -v2c -c public <target> Jetnet5010G::portCtrlFlowControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5.1
snmpget -v2c -c public <target> Jetnet5010G::portCtrlFlowControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5.1 i <value>

Start monitoring Korenix JetNet industrial Ethernet rail switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Jetnet5010G::portCtrlFlowControl OID value, configure state conditions and alerts, and monitor any Korenix JetNet industrial Ethernet rail switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.24062korenixJetnet4508V2
1.3.6.1.4.1.24062.2productsJetnet4508V2
1.3.6.1.4.1.24062.2.2managedFESwitchJetnet4508V2
Numeric OIDNameModule
1.3.6.1.4.1.24062.2.2.1jetnet5010GJetnet5010G
1.3.6.1.4.1.24062.2.2.1.3portConfigurationJetnet5010G
1.3.6.1.4.1.24062.2.2.1.3.1portControlJetnet5010G
1.3.6.1.4.1.24062.2.2.1.3.1.1portCtrlTableJetnet5010G
1.3.6.1.4.1.24062.2.2.1.3.1.1.1portCtrlEntryJetnet5010G
1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5portCtrlFlowControlJetnet5010G