All MIBs › JUNIPER-VPN-MIB › jnxVpnRTFunction
jnxVpnRTFunction
Module: JUNIPER-VPN-MIB
OID (symbolic): JUNIPER-VPN-MIB::jnxVpnRTFunction
OID (numeric): 1.3.6.1.4.1.2636.3.26.1.5.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The route target export distribution type.
What is jnxVpnRTFunction?
Distribution direction this Route Target is used for: import(1) to accept routes tagged with it, export(2) to tag outgoing routes with it, or both(3); a misconfigured import/export direction is a classic cause of a BGP/MPLS VPN not learning expected routes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.5.1.8 snmpwalk -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnRTFunction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.5.1.8.1 snmpget -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnRTFunction.1
Start monitoring Juniper MX/PE router (L2VPN/L3VPN service instances) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-VPN-MIB::jnxVpnRTFunction OID value, configure state conditions and alerts, and monitor any Juniper MX/PE router (L2VPN/L3VPN service instances) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.26 | jnxVpnMIB | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1 | jnxVpnMibObjects | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.5 | jnxVpnRTTable | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.5.1 | jnxVpnRTEntry | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.5.1.8 | jnxVpnRTFunction | JUNIPER-VPN-MIB |