All MIBs › JUNIPER-VPN-MIB › jnxVpnPwRemoteSiteId
jnxVpnPwRemoteSiteId
Module: JUNIPER-VPN-MIB
OID (symbolic): JUNIPER-VPN-MIB::jnxVpnPwRemoteSiteId
OID (numeric): 1.3.6.1.4.1.2636.3.26.1.4.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The remote site (i.e., the site at the other end of this Pseudo-Wire) identifier. If there is no remote site identifier, a value of zero is to be returned.
What is jnxVpnPwRemoteSiteId?
Site identifier of the remote end of this pseudowire; zero if no remote site identifier applies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.4.1.8 snmpwalk -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnPwRemoteSiteId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.4.1.8.1 snmpget -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnPwRemoteSiteId.1
Start monitoring Juniper MX/PE router (L2VPN/L3VPN service instances) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-VPN-MIB::jnxVpnPwRemoteSiteId OID value, configure state conditions and alerts, and monitor any Juniper MX/PE router (L2VPN/L3VPN service instances) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.26 | jnxVpnMIB | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1 | jnxVpnMibObjects | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.4 | jnxVpnPwTable | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.4.1 | jnxVpnPwEntry | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.4.1.8 | jnxVpnPwRemoteSiteId | JUNIPER-VPN-MIB |