All MIBs › JUNIPER-VPN-MIB › jnxVpnIfOutBandwidth

jnxVpnIfOutBandwidth

OID (symbolic): JUNIPER-VPN-MIB::jnxVpnIfOutBandwidth

OID (numeric): 1.3.6.1.4.1.2636.3.26.1.3.1.9

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Maximum bandwidth that the PE can send to the CE over this VPN interface, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum.

What is jnxVpnIfOutBandwidth?

Maximum bandwidth, in KBps, that the PE is allowed to send to the CE over this VPN interface; zero means no configured maximum.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.3.1.9
snmpwalk -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnIfOutBandwidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.3.1.9.1
snmpget -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnIfOutBandwidth.1

Start monitoring Juniper MX/PE router (L2VPN/L3VPN service instances) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-VPN-MIB::jnxVpnIfOutBandwidth OID value, configure state conditions and alerts, and monitor any Juniper MX/PE router (L2VPN/L3VPN service instances) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.2636	juniperMIB	JUNIPER-SMI
1.3.6.1.4.1.2636.3	jnxMibs	JUNIPER-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.2636.3.26	jnxVpnMIB	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1	jnxVpnMibObjects	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1.3	jnxVpnIfTable	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1.3.1	jnxVpnIfEntry	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1.3.1.9	jnxVpnIfOutBandwidth	JUNIPER-VPN-MIB

JUNIPER-VPN-MIB :: jnxVpnIfOutBandwidth

jnxVpnIfOutBandwidth

Module

This MIB depends on