All MIBs › JUNIPER-VPN-MIB › jnxVpnIfInBandwidth

jnxVpnIfInBandwidth

OID (symbolic): JUNIPER-VPN-MIB::jnxVpnIfInBandwidth

OID (numeric): 1.3.6.1.4.1.2636.3.26.1.3.1.8

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Maximum bandwidth that the CE connected over this VPN i/f can send to the PE, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum.

What is jnxVpnIfInBandwidth?

Maximum bandwidth, in KBps, that the CE connected over this VPN interface is allowed to send to the PE; zero means no configured maximum.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.3.1.8
snmpwalk -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnIfInBandwidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.3.1.8.1
snmpget -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnIfInBandwidth.1

Start monitoring Juniper MX/PE router (L2VPN/L3VPN service instances) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-VPN-MIB::jnxVpnIfInBandwidth OID value, configure state conditions and alerts, and monitor any Juniper MX/PE router (L2VPN/L3VPN service instances) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.2636	juniperMIB	JUNIPER-SMI
1.3.6.1.4.1.2636.3	jnxMibs	JUNIPER-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.2636.3.26	jnxVpnMIB	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1	jnxVpnMibObjects	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1.3	jnxVpnIfTable	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1.3.1	jnxVpnIfEntry	JUNIPER-VPN-MIB
1.3.6.1.4.1.2636.3.26.1.3.1.8	jnxVpnIfInBandwidth	JUNIPER-VPN-MIB

JUNIPER-VPN-MIB :: jnxVpnIfInBandwidth

jnxVpnIfInBandwidth

Module

This MIB depends on