All MIBs › JUNIPER-VPN-MIB › jnxVpnIfAssociatedPw
jnxVpnIfAssociatedPw
Module: JUNIPER-VPN-MIB
OID (symbolic): JUNIPER-VPN-MIB::jnxVpnIfAssociatedPw
OID (numeric): 1.3.6.1.4.1.2636.3.26.1.3.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Index of associated Pseudo-wire, if any, in which case the index MUST be non-zero. If none, then this index MUST be zero.
What is jnxVpnIfAssociatedPw?
Index of the pseudowire associated with this VPN interface, if any (non-zero); zero means this interface has no associated pseudowire.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.3.1.6 snmpwalk -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnIfAssociatedPw
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.26.1.3.1.6.1 snmpget -v2c -c public <target> JUNIPER-VPN-MIB::jnxVpnIfAssociatedPw.1
Start monitoring Juniper MX/PE router (L2VPN/L3VPN service instances) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-VPN-MIB::jnxVpnIfAssociatedPw OID value, configure state conditions and alerts, and monitor any Juniper MX/PE router (L2VPN/L3VPN service instances) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.26 | jnxVpnMIB | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1 | jnxVpnMibObjects | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.3 | jnxVpnIfTable | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.3.1 | jnxVpnIfEntry | JUNIPER-VPN-MIB |
| 1.3.6.1.4.1.2636.3.26.1.3.1.6 | jnxVpnIfAssociatedPw | JUNIPER-VPN-MIB |