JUNIPER-PING-MIB :: jnxPingLastTestResultMaxRttUs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsJUNIPER-PING-MIBjnxPingLastTestResultMaxRttUs

jnxPingLastTestResultMaxRttUs

Module: JUNIPER-PING-MIB

OID (symbolic): JUNIPER-PING-MIB::jnxPingLastTestResultMaxRttUs

OID (numeric): 1.3.6.1.4.1.2636.3.7.1.5.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The maximum of the round trip delays measured for all the probes during the most recently completed test. Measured in microseconds.

What is jnxPingLastTestResultMaxRttUs?

Reports the largest round-trip time, in microseconds, seen during the most recently completed test. It shows the worst-case latency spike in that run.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.7.1.5.1.5
snmpwalk -v2c -c public <target> JUNIPER-PING-MIB::jnxPingLastTestResultMaxRttUs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.7.1.5.1.5.1
snmpget -v2c -c public <target> JUNIPER-PING-MIB::jnxPingLastTestResultMaxRttUs.1

Start monitoring Juniper routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-PING-MIB::jnxPingLastTestResultMaxRttUs OID value, configure state conditions and alerts, and monitor any Juniper routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.7jnxPingMIBJUNIPER-PING-MIB
1.3.6.1.4.1.2636.3.7.1jnxPingObjectsJUNIPER-PING-MIB
1.3.6.1.4.1.2636.3.7.1.5jnxPingLastTestResultTableJUNIPER-PING-MIB
1.3.6.1.4.1.2636.3.7.1.5.1jnxPingLastTestResultEntryJUNIPER-PING-MIB
1.3.6.1.4.1.2636.3.7.1.5.1.5jnxPingLastTestResultMaxRttUsJUNIPER-PING-MIB