All MIBs › JUNIPER-PING-MIB › jnxPingCtlIngressJitterThreshold
jnxPingCtlIngressJitterThreshold
Module: JUNIPER-PING-MIB
OID (symbolic): JUNIPER-PING-MIB::jnxPingCtlIngressJitterThreshold
OID (numeric): 1.3.6.1.4.1.2636.3.7.1.2.1.15
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The maximum allowed jitter in the ingress trip time over the course of any test. Jitter is defined as the difference between the maximum and minimum ingress trip times measured over the course of a single test (jnxPingResultsMaxDstSrct minus jnxPingResultsMinDstSrct). If the measured jitter exceeds this threshold, a jnxPingIngressJitterThresholdExceeded trap will be sent. This applies only if the probe type (pingCtlType) provides one way delay measurements. Currently jnxPingIcmpTimeStamp is the only supported probe type with this property.
What is jnxPingCtlIngressJitterThreshold?
Sets the maximum allowed jitter in the ingress (return-path) trip time, in microseconds, computed from the test's max and min ingress delays; exceeding it fires a jnxPingIngressJitterThresholdExceeded trap. Applies only where the probe type supports one-way measurements.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.7 | jnxPingMIB | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1 | jnxPingObjects | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2 | jnxPingCtlTable | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2.1 | jnxPingCtlEntry | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2.1.15 | jnxPingCtlIngressJitterThreshold | JUNIPER-PING-MIB |