All MIBs › JUNIPER-PING-MIB › jnxPingCtlEgressStdDevThreshold
jnxPingCtlEgressStdDevThreshold
Module: JUNIPER-PING-MIB
OID (symbolic): JUNIPER-PING-MIB::jnxPingCtlEgressStdDevThreshold
OID (numeric): 1.3.6.1.4.1.2636.3.7.1.2.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The maximum egress trip time standard deviation allowed over the course of any test. If the calculated standard deviation of the egress trip time at the end of any test exceeds this threshold, a jnxPingEgressStdDevThresholdExceeded trap will be sent. This applies only if the probe type (pingCtlType) provides one way delay measurements. Currently jnxPingIcmpTimeStamp is the only supported probe type with this property.
What is jnxPingCtlEgressStdDevThreshold?
Sets the maximum allowed standard deviation of the egress (outbound) trip time, in microseconds, across a test; exceeding it fires a jnxPingEgressStdDevThresholdExceeded trap. Like other egress thresholds, it only applies to the ICMP timestamp probe type that supports one-way measurements.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.7 | jnxPingMIB | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1 | jnxPingObjects | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2 | jnxPingCtlTable | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2.1 | jnxPingCtlEntry | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2.1.11 | jnxPingCtlEgressStdDevThreshold | JUNIPER-PING-MIB |