All MIBs › JUNIPER-PING-MIB › jnxPingCtlEgressJitterThreshold
jnxPingCtlEgressJitterThreshold
Module: JUNIPER-PING-MIB
OID (symbolic): JUNIPER-PING-MIB::jnxPingCtlEgressJitterThreshold
OID (numeric): 1.3.6.1.4.1.2636.3.7.1.2.1.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The maximum allowed jitter in the egress trip time over the course of any test. Jitter is defined as the difference between the maximum and minimum egress trip times measured over the course of a single test (jnxPingResultsMaxSrcDstt minus jnxPingResultsMinSrcDstt). If the measured jitter exceeds this threshold, a jnxPingEgressJitterThresholdExceeded trap will be sent. This applies only if the probe type (pingCtlType) provides one way delay measurements. Currently jnxPingIcmpTimeStamp is the only supported probe type with this property.
What is jnxPingCtlEgressJitterThreshold?
Sets the maximum allowed jitter in the egress trip time, in microseconds, computed as the difference between the test's max and min egress delays; exceeding it fires a jnxPingEgressJitterThresholdExceeded trap. It applies only to one-way-capable probe types such as jnxPingIcmpTimeStamp.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.7 | jnxPingMIB | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1 | jnxPingObjects | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2 | jnxPingCtlTable | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2.1 | jnxPingCtlEntry | JUNIPER-PING-MIB |
| 1.3.6.1.4.1.2636.3.7.1.2.1.12 | jnxPingCtlEgressJitterThreshold | JUNIPER-PING-MIB |