All MIBs › JUNIPER-IPSEC-FLOW-MON-MIB › jnxIpSecTunMonAHInBytes
jnxIpSecTunMonAHInBytes
Module: JUNIPER-IPSEC-FLOW-MON-MIB
OID (symbolic): JUNIPER-IPSEC-FLOW-MON-MIB::jnxIpSecTunMonAHInBytes
OID (numeric): 1.3.6.1.4.1.2636.3.52.1.2.2.1.14
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: Number of incoming bytes authenticated using AH by this Phase-2 tunnel.
What is jnxIpSecTunMonAHInBytes?
The total number of incoming bytes on this tunnel authenticated using the AH (Authentication Header) protocol, as opposed to ESP. Most modern IPsec deployments use ESP rather than AH, so a nonzero value here indicates this tunnel is specifically running AH-based authentication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.52.1.2.2.1.14 snmpwalk -v2c -c public <target> JUNIPER-IPSEC-FLOW-MON-MIB::jnxIpSecTunMonAHInBytes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.52.1.2.2.1.14.1 snmpget -v2c -c public <target> JUNIPER-IPSEC-FLOW-MON-MIB::jnxIpSecTunMonAHInBytes.1
Start monitoring Juniper Networks VPN gateway (IKE/IPsec tunnel and SA monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IPSEC-FLOW-MON-MIB::jnxIpSecTunMonAHInBytes OID value, configure state conditions and alerts, and monitor any Juniper Networks VPN gateway (IKE/IPsec tunnel and SA monitoring) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.52 | jnxIpSecMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.52.1 | jnxIpSecFlowMonMIB | JUNIPER-IPSEC-FLOW-MON-MIB |
| 1.3.6.1.4.1.2636.3.52.1.2 | jnxIpSecFlowMonPhaseTwo | JUNIPER-IPSEC-FLOW-MON-MIB |
| 1.3.6.1.4.1.2636.3.52.1.2.2 | jnxIpSecTunnelMonTable | JUNIPER-IPSEC-FLOW-MON-MIB |
| 1.3.6.1.4.1.2636.3.52.1.2.2.1 | jnxIpSecTunnelMonEntry | JUNIPER-IPSEC-FLOW-MON-MIB |
| 1.3.6.1.4.1.2636.3.52.1.2.2.1.14 | jnxIpSecTunMonAHInBytes | JUNIPER-IPSEC-FLOW-MON-MIB |