All MIBs › JUNIPER-IFOPTICS-MIB › jnxPMIntSuspectReason
jnxPMIntSuspectReason
Module: JUNIPER-IFOPTICS-MIB
OID (symbolic): JUNIPER-IFOPTICS-MIB::jnxPMIntSuspectReason
OID (numeric): 1.3.6.1.4.1.2636.3.71.1.2.2.1.28
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
What is jnxPMIntSuspectReason?
When jnxPMIntSuspectedFlag is true, this code explains why this completed interval's PM data is considered unreliable: reasons include the object being newly created, the interface being disabled, a clock shift, manual clearing, an interval that ran too short or too long, either end of the link being unavailable, partial data, or missing intervals from a restart. Admins use this to judge whether a bad-looking historical interval reflects a real fault or just a data-collection gap.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.71.1.2.2.1.28 snmpwalk -v2c -c public <target> JUNIPER-IFOPTICS-MIB::jnxPMIntSuspectReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.71.1.2.2.1.28.1 snmpget -v2c -c public <target> JUNIPER-IFOPTICS-MIB::jnxPMIntSuspectReason.1
Start monitoring Juniper router or switch with pluggable optical/DWDM transceivers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IFOPTICS-MIB::jnxPMIntSuspectReason OID value, configure state conditions and alerts, and monitor any Juniper router or switch with pluggable optical/DWDM transceivers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.71 | jnxOpticsMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.71.1 | jnxIfOpticsMib | JUNIPER-IFOPTICS-MIB |
| 1.3.6.1.4.1.2636.3.71.1.2 | jnxOpticsPerformanceMonitoring | JUNIPER-IFOPTICS-MIB |
| 1.3.6.1.4.1.2636.3.71.1.2.2 | jnxOpticsPMIntervalTable | JUNIPER-IFOPTICS-MIB |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1 | jnxOpticsPMIntervalEntry | JUNIPER-IFOPTICS-MIB |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.28 | jnxPMIntSuspectReason | JUNIPER-IFOPTICS-MIB |