All MIBs › JUNIPER-BFD-MIB › jnxBfdSessThreshTxInterval
jnxBfdSessThreshTxInterval
Module: JUNIPER-BFD-MIB
OID (symbolic): JUNIPER-BFD-MIB::jnxBfdSessThreshTxInterval
OID (numeric): 1.3.6.1.4.1.2636.3.45.1.1.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The threshold value for transmit interval in microseconds. If the current transmit interval value adapts to a value greater than the threshold value, jnxBfdSessTxIntervalHigh trap is raised.
What is jnxBfdSessThreshTxInterval?
This object holds the configured threshold, in microseconds, for the BFD session's transmit interval; if the session's current transmit interval adapts to a value greater than this threshold, a jnxBfdSessTxIntervalHigh trap is raised. Admins set this threshold to get alerted when a BFD session's actual transmit rate slows down beyond an acceptable bound, which could indicate the peer or link is under stress. For example, setting this threshold to 100000 microseconds means the router will raise an alarm if the session's transmit interval adapts to something slower than 100 milliseconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.45.1.1.1.1.1 snmpwalk -v2c -c public <target> JUNIPER-BFD-MIB::jnxBfdSessThreshTxInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.45.1.1.1.1.1.1 snmpget -v2c -c public <target> JUNIPER-BFD-MIB::jnxBfdSessThreshTxInterval.1
Start monitoring Juniper Networks router/switch (BFD session monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-BFD-MIB::jnxBfdSessThreshTxInterval OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (BFD session monitoring) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.45 | jnxBfdMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.45.1 | jnxBfdMib | JUNIPER-BFD-MIB |
| 1.3.6.1.4.1.2636.3.45.1.1 | jnxBfdObjects | JUNIPER-BFD-MIB |
| 1.3.6.1.4.1.2636.3.45.1.1.1 | jnxBfdSessTable | JUNIPER-BFD-MIB |
| 1.3.6.1.4.1.2636.3.45.1.1.1.1 | jnxBfdSessEntry | JUNIPER-BFD-MIB |
| 1.3.6.1.4.1.2636.3.45.1.1.1.1.1 | jnxBfdSessThreshTxInterval | JUNIPER-BFD-MIB |