All MIBs › JUNIPER-ANALYZER-MIB › jnxMirroringRatio
jnxMirroringRatio
Module: JUNIPER-ANALYZER-MIB
OID (symbolic): JUNIPER-ANALYZER-MIB::jnxMirroringRatio
OID (numeric): 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object will specify the mirroring ratio. User can configure the analyzer to mirror only one out of X packets [1:X packets] in the ingress/egress side based on whether the port is configured for ingress or egress mirroring. The configuration supports a range from 1: X [0 <= X <= 2047].Default value is 1.
What is jnxMirroringRatio?
This read-only Unsigned32 object reports the configured mirroring ratio for an analyzer session, meaning 1 out of every X packets is mirrored, with X ranging from 0 to 2047 and a default of 1. It lets an admin see how aggressively ingress or egress traffic on a monitored port is being sampled to the analyzer destination, rather than mirroring every single packet. For example, a value of 10 means only 1 in 10 packets on the monitored port is copied to the analyzer port, reducing load on the destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3 snmpwalk -v2c -c public <target> JUNIPER-ANALYZER-MIB::jnxMirroringRatio
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3.1 snmpget -v2c -c public <target> JUNIPER-ANALYZER-MIB::jnxMirroringRatio.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxMirroringRatio.1
Start monitoring Juniper Networks EX/QFX switch (Analyzer port-mirroring feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ANALYZER-MIB::jnxMirroringRatio OID value, configure state conditions and alerts, and monitor any Juniper Networks EX/QFX switch (Analyzer port-mirroring feature) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40 | jnxExMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40.1 | jnxExSwitching | JUNIPER-EX-SMI |
| 1.3.6.1.4.1.2636.3.40.1.1 | jnxExAnalyzer | JUNIPER-EX-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.40.1.1.1 | jnxAnalyzerMIB | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1 | jnxAnalyzerMIBObjects | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1 | jnxAnalyzerTable | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1 | jnxAnalyzerEntry | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3 | jnxMirroringRatio | JUNIPER-ANALYZER-MIB |