All MIBs › JUNIPER-ANALYZER-MIB › jnxExAnalyzerInputType
jnxExAnalyzerInputType
Module: JUNIPER-ANALYZER-MIB
OID (symbolic): JUNIPER-ANALYZER-MIB::jnxExAnalyzerInputType
OID (numeric): 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This specifies whether interfaces or VLANs is mirrored.
Mirroring can be done on the basis of the interface name.All packets received on a port configured for ingress mirroring is sent to the analyzer port.All packets sent out on a port configured for egress mirroring is sent to the analyzer port.Any number of network ports can be configured for ingress or egress mirroring.The value one of jnxAnalyzerInputType corresponds to mirroring the interface traffic.
On a particular switch, the user can choose to monitor all the ports that belong to a particular VLAN. It is needed in order to analyze the network traffic in one or more VLANs.Mirroring can be configured in ingress direction only for VLAN.
Mirroring can be done on the basis of VLAN name (supported only in ingress). All packets received on a particular VLAN are sent out to the analyzer.The value two of jnxExAnalyzerInputType corresponds to mirroring vlan traffic.
What is jnxExAnalyzerInputType?
This read-only INTEGER object, the EX-series counterpart to jnxAnalyzerInputType, reports whether an analyzer session mirrors traffic based on interface(1) or vlanname(2). It works the same way as the standard object: interface-based mirroring copies traffic in or out of specific ports, while VLAN-based mirroring, ingress only, copies all traffic seen on a named VLAN. For example, an EX-series switch reporting vlanname(2) here means the analyzer session is capturing every packet received on that VLAN across all member ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3 snmpwalk -v2c -c public <target> JUNIPER-ANALYZER-MIB::jnxExAnalyzerInputType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3.1 snmpget -v2c -c public <target> JUNIPER-ANALYZER-MIB::jnxExAnalyzerInputType.1
Start monitoring Juniper Networks EX/QFX switch (Analyzer port-mirroring feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ANALYZER-MIB::jnxExAnalyzerInputType OID value, configure state conditions and alerts, and monitor any Juniper Networks EX/QFX switch (Analyzer port-mirroring feature) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40 | jnxExMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40.1 | jnxExSwitching | JUNIPER-EX-SMI |
| 1.3.6.1.4.1.2636.3.40.1.1 | jnxExAnalyzer | JUNIPER-EX-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.40.1.1.1 | jnxAnalyzerMIB | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1 | jnxAnalyzerMIBObjects | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4 | jnxExAnalyzerInputTable | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1 | jnxExAnalyzerInputEntry | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3 | jnxExAnalyzerInputType | JUNIPER-ANALYZER-MIB |