All MIBs › JUNIPER-ANALYZER-MIB › jnxAnalyzerInputType
jnxAnalyzerInputType
Module: JUNIPER-ANALYZER-MIB
OID (symbolic): JUNIPER-ANALYZER-MIB::jnxAnalyzerInputType
OID (numeric): 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This specifies whether interfaces or VLANs is mirrored.
Mirroring can be done on the basis of the interface name.All packets received on a port configured for ingress mirroring is sent to the analyzer port.All packets sent out on a port configured for egress mirroring is sent to the analyzer port.Any number of network ports can be configured for ingress or egress mirroring.The value one of jnxAnalayzerInputType corresponds to mirroring the interface traffic.
On a particular switch, the user can choose to monitor all the ports that belong to a particular VLAN. It is needed in order to analyze the network traffic in one or more VLANs.Mirroring can be configured in ingress direction only for VLAN.
Mirroring can be done on the basis of VLAN name (supported only in ingress). All packets received on a particular VLAN are sent out to the analyzer.The value two of jnxAnalyzerInputType corresponds to mirroring vlan traffic.
What is jnxAnalyzerInputType?
This obsolete read-only INTEGER object indicated whether an analyzer session's source was defined by interface(1) or by vlanname(2). It let an admin see whether mirroring was scoped to specific physical or logical ports or to all traffic on a named VLAN, the latter being ingress-only. For example, a value of vlanname(2) meant the session was mirroring all packets received on a particular VLAN rather than on a specific port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3 snmpwalk -v2c -c public <target> JUNIPER-ANALYZER-MIB::jnxAnalyzerInputType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3.1 snmpget -v2c -c public <target> JUNIPER-ANALYZER-MIB::jnxAnalyzerInputType.1
Start monitoring Juniper Networks EX/QFX switch (Analyzer port-mirroring feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ANALYZER-MIB::jnxAnalyzerInputType OID value, configure state conditions and alerts, and monitor any Juniper Networks EX/QFX switch (Analyzer port-mirroring feature) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40 | jnxExMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40.1 | jnxExSwitching | JUNIPER-EX-SMI |
| 1.3.6.1.4.1.2636.3.40.1.1 | jnxExAnalyzer | JUNIPER-EX-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.40.1.1.1 | jnxAnalyzerMIB | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1 | jnxAnalyzerMIBObjects | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2 | jnxAnalyzerInputTable | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1 | jnxAnalyzerInputEntry | JUNIPER-ANALYZER-MIB |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3 | jnxAnalyzerInputType | JUNIPER-ANALYZER-MIB |