All MIBs › JNX-PPPOE-MIB › jnxPPPoEServiceNameTableRowStatus
jnxPPPoEServiceNameTableRowStatus
Module: JNX-PPPOE-MIB
OID (symbolic): JNX-PPPOE-MIB::jnxPPPoEServiceNameTableRowStatus
OID (numeric): 1.3.6.1.4.1.2636.3.67.1.1.4.1.1.2
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-only
Description: Controls creation/deletion of entries in this table with READ-CREATE
maximum access,according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
jnxPPPoEServiceNameTableRowStatus
jnxPPPoEServiceNameTableName
The Empty Service and Any service will be automatically configured
for each Service Name Table created. On creating or deleting an entry in
this table will create/destroy an entry for
What is jnxPPPoEServiceNameTableRowStatus?
This OID controls creating or deleting a PPPoE Service-Name Table entry, restricted to createAndGo and destroy on write; creating or destroying a table here also creates or destroys matching Empty-Service and Any-Service entries automatically. An engineer sets this to provision a new named group of service-name rules for PADI processing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.67.1.1.4.1.1.2 snmpwalk -v2c -c public <target> JNX-PPPOE-MIB::jnxPPPoEServiceNameTableRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.67.1.1.4.1.1.2.1 snmpget -v2c -c public <target> JNX-PPPOE-MIB::jnxPPPoEServiceNameTableRowStatus.1
Start monitoring Juniper Networks MX-series broadband network gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPPOE-MIB::jnxPPPoEServiceNameTableRowStatus OID value, configure state conditions and alerts, and monitor any Juniper Networks MX-series broadband network gateway from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.67 | jnxPppoeMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.67.1 | jnxPPPoEMIB | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1 | jnxPPPoEObjects | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.4 | jnxPPPoEServices | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.4.1 | jnxPPPoEServiceNameTableTable | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.4.1.1 | jnxPPPoEServiceNameTableEntry | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.4.1.1.2 | jnxPPPoEServiceNameTableRowStatus | JNX-PPPOE-MIB |