All MIBs › JNX-PPPOE-MIB › jnxPPPoEIfLockoutMax
jnxPPPoEIfLockoutMax
Module: JNX-PPPOE-MIB
OID (symbolic): JNX-PPPOE-MIB::jnxPPPoEIfLockoutMax
OID (numeric): 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if jnxPPPoEIfAutoconfig is set for this interface.
The ability to lockout the client from recognition in the event of an error in creating a PPP interface is enabled by default. The initial lockout duration is jnxPPPoEIfLockoutMin and increases exponentially for each failure that occurs for the client interface within the greater of 15 minutes and this object's value.
The lockout duration for the client will not exceed jnxPPPoEIfLockoutMax. If the time between creation errors for the PPP interface for this interface is greater than the greater of 15 minutes and jnxPPPoEIfLockoutMax, then the lockout duration reverts to jnxPPPoEIfLockoutMin.
To disable the ability to lockout the client from recognition in the event of an error in creating a PPP interface for the specified interface, the value of this object and jnxPPPoEIfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes or when this interface supports more than one session.
What is jnxPPPoEIfLockoutMax?
This OID sets the upper bound, in seconds, on how long a lockout duration can grow to as repeated PPP interface creation failures occur for the same client on this PPPoE interface. A network engineer raises this ceiling to slow down a persistently misbehaving client faster, or sets it to zero along with jnxPPPoEIfLockoutMin to turn off lockout for testing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13 snmpwalk -v2c -c public <target> JNX-PPPOE-MIB::jnxPPPoEIfLockoutMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13.1 snmpget -v2c -c public <target> JNX-PPPOE-MIB::jnxPPPoEIfLockoutMax.1
Start monitoring Juniper Networks MX-series broadband network gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-PPPOE-MIB::jnxPPPoEIfLockoutMax OID value, configure state conditions and alerts, and monitor any Juniper Networks MX-series broadband network gateway from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.67 | jnxPppoeMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.67.1 | jnxPPPoEMIB | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1 | jnxPPPoEObjects | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.1 | jnxPPPoEIfLayer | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2 | jnxPPPoEIfTable | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1 | jnxPPPoEIfEntry | JNX-PPPOE-MIB |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13 | jnxPPPoEIfLockoutMax | JNX-PPPOE-MIB |