JNX-GDOI-MIB :: jnxGdoiGmTekEncryptionAlgorithm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JNX-GDOI-MIB › jnxGdoiGmTekEncryptionAlgorithm

jnxGdoiGmTekEncryptionAlgorithm

Module: JNX-GDOI-MIB

OID (symbolic): JNX-GDOI-MIB::jnxGdoiGmTekEncryptionAlgorithm

OID (numeric): 1.3.6.1.4.1.2636.3.759.1.3.6.1.4

Node type: OBJECT-TYPE

Type: JnxGdoiEncryptionAlgorithm

Access: read-only

Description: The value of the Transform ID field of a PROTO_IPSEC_ESP
payload which specifies the ESP transform to be used.  If
no encryption is used, this value will be zero (0).

Following are the ESP Transform values defined in RFC 2407,
however the JnxGdoiEncryptionAlgorithm TC defines all possible
values.

  IPsec ESP Transform ID    Value
  ------------------------  -----
   RESERVED                   0
   ESP_DES_IV64               1
   ESP_DES                    2
   ESP_3DES                   3
   ESP_RC5                    4
   ESP_IDEA                   5
   ESP_CAST                   6
   ESP_BLOWFISH               7
   ESP_3IDEA                  8
   ESP_DES_IV32               9
   ESP_RC4                    10
   ESP_NULL                   11

What is jnxGdoiGmTekEncryptionAlgorithm?

Identifies the ESP encryption transform used by this Traffic Encryption Key, or zero if no encryption is applied, letting an admin confirm the cipher protecting this group's dataplane traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.759.1.3.6.1.4
snmpwalk -v2c -c public <target> JNX-GDOI-MIB::jnxGdoiGmTekEncryptionAlgorithm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.759.1.3.6.1.4.1
snmpget -v2c -c public <target> JNX-GDOI-MIB::jnxGdoiGmTekEncryptionAlgorithm.1

Start monitoring Juniper Networks router/security gateway (GDOI group VPN key management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-GDOI-MIB::jnxGdoiGmTekEncryptionAlgorithm OID value, configure state conditions and alerts, and monitor any Juniper Networks router/security gateway (GDOI group VPN key management) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.759jnxGdoiMIBJNX-GDOI-MIB
1.3.6.1.4.1.2636.3.759.1jnxGdoiMIBObjectsJNX-GDOI-MIB
1.3.6.1.4.1.2636.3.759.1.3jnxGdoiSecAssociationsJNX-GDOI-MIB
1.3.6.1.4.1.2636.3.759.1.3.6jnxGdoiGmTekPolicyTableJNX-GDOI-MIB
1.3.6.1.4.1.2636.3.759.1.3.6.1jnxGdoiGmTekPolicyEntryJNX-GDOI-MIB
1.3.6.1.4.1.2636.3.759.1.3.6.1.4jnxGdoiGmTekEncryptionAlgorithmJNX-GDOI-MIB