All MIBs › ITOUCH-BRIDGE-MIB › bridgeState
bridgeState
Module: ITOUCH-BRIDGE-MIB
OID (symbolic): ITOUCH-BRIDGE-MIB::bridgeState
OID (numeric): 1.3.6.1.4.1.33.19.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls whether the bridge will perform bridging.
What is bridgeState?
This object controls whether the iTouch bridge performs Ethernet bridging at all, choosing between disabled(1) and enabled(2), defaulting to enabled. An admin would disable this only to fully stop the device from forwarding frames as a bridge, effectively taking it out of the data path. For example, an admin troubleshooting a suspected bridging loop might temporarily set this to disabled(1) to isolate the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33.19.1.1 snmpwalk -v2c -c public <target> ITOUCH-BRIDGE-MIB::bridgeState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.33.19.1.1.1 snmpget -v2c -c public <target> ITOUCH-BRIDGE-MIB::bridgeState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.33.19.1.1.1 i <value>
Start monitoring iTouch switches and bridging appliances with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ITOUCH-BRIDGE-MIB::bridgeState OID value, configure state conditions and alerts, and monitor any iTouch switches and bridging appliances from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.33 | xyplex | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.33.19 | xBridge | ITOUCH-BRIDGE-MIB |
| 1.3.6.1.4.1.33.19.1 | xBridgeSystem | ITOUCH-BRIDGE-MIB |
| 1.3.6.1.4.1.33.19.1.1 | bridgeState | ITOUCH-BRIDGE-MIB |