ITF-MIB :: ifTestType

MIB Reference — IPNetwork Monitor

All MIBsITF-MIBifTestType

ifTestType

Module: ITF-MIB

OID (symbolic): ITF-MIB::ifTestType

OID (numeric): 1.3.6.1.2.1.31.1.3.1.3

Node type: OBJECT-TYPE

Type: AutonomousType

Access: read-write

Description:

A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier:

noTest OBJECT IDENTIFIER ::= { 0 0 }

When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated.

When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.

ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: -

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.31.1.3.1.3
snmpwalk -v2c -c public <target> ITF-MIB::ifTestType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.31.1.3.1.3.1
snmpget -v2c -c public <target> ITF-MIB::ifTestType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.31.1.3.1.3.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.2mgmtBKTEL-HFC862-BASE-MIB
1.3.6.1.2.1mib_2CHECKPOINT-MIB-2
1.3.6.1.2.1.31ifMIBIF-MIB
1.3.6.1.2.1.31.1ifMIBObjectsIF-MIB
1.3.6.1.2.1.31.1.3ifTestTableIF-MIB
1.3.6.1.2.1.31.1.3.1ifTestEntryIF-MIB
1.3.6.1.2.1.31.1.3.1.3ifTestTypeITF-MIB