All MIBs › ITF-MIB › ifHighSpeed
ifHighSpeed
Module: ITF-MIB
OID (symbolic): ITF-MIB::ifHighSpeed
OID (numeric): 1.3.6.1.2.1.31.1.1.1.15
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description:
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: Mbit/second
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.31.1.1.1.15 snmpwalk -v2c -c public <target> ITF-MIB::ifHighSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.31.1.1.1.15.1 snmpget -v2c -c public <target> ITF-MIB::ifHighSpeed.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.31 | ifMIB | IF-MIB |
| 1.3.6.1.2.1.31.1 | ifMIBObjects | IF-MIB |
| 1.3.6.1.2.1.31.1.1 | ifXTable | IF-MIB |
| 1.3.6.1.2.1.31.1.1.1 | ifXEntry | IF-MIB |
| 1.3.6.1.2.1.31.1.1.1.15 | ifHighSpeed | ITF-MIB |