All MIBs › IPMROUTE-STD-MIB › ipMRouteInIfIndex
ipMRouteInIfIndex
Module: IPMROUTE-STD-MIB
OID (symbolic): IPMROUTE-STD-MIB::ipMRouteInIfIndex
OID (numeric): 1.3.6.1.2.1.83.1.1.2.1.5
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-only
Description: The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may be accepted on multiple interfaces (e.g., in CBT).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.83.1.1.2.1.5 snmpwalk -v2c -c public <target> IPMROUTE-STD-MIB::ipMRouteInIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.83.1.1.2.1.5.1 snmpget -v2c -c public <target> IPMROUTE-STD-MIB::ipMRouteInIfIndex.1
Start monitoring Vendor-neutral IETF standard, RFC 2932 (multicast-capable router/Layer 3 switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPMROUTE-STD-MIB::ipMRouteInIfIndex OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 2932 (multicast-capable router/Layer 3 switch) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.83 | ipMRouteStdMIB | IPMROUTE-STD-MIB |
| 1.3.6.1.2.1.83.1 | ipMRouteMIBObjects | IPMROUTE-STD-MIB |
| 1.3.6.1.2.1.83.1.1 | ipMRoute | IPMROUTE-STD-MIB |
| 1.3.6.1.2.1.83.1.1.2 | ipMRouteTable | IPMROUTE-STD-MIB |
| 1.3.6.1.2.1.83.1.1.2.1 | ipMRouteEntry | IPMROUTE-STD-MIB |
| 1.3.6.1.2.1.83.1.1.2.1.5 | ipMRouteInIfIndex | IPMROUTE-STD-MIB |