All MIBs › IPADv2-MIB › ipadFrPortRxInvAlmThreshold
ipadFrPortRxInvAlmThreshold
Module: IPADv2-MIB
OID (symbolic): IPADv2-MIB::ipadFrPortRxInvAlmThreshold
OID (numeric): 1.3.6.1.4.1.321.100.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm.
What is ipadFrPortRxInvAlmThreshold?
This object sets the threshold for raising an alarm when invalid frames are received on a Frame Relay port, measured as a count of bad frames. Setting the value to zero disables the alarm; non-zero values trigger warnings when invalid frame counts exceed the threshold. Operators configure this to detect frame errors and signal degrading link quality that may need troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.1.1.1.5 snmpwalk -v2c -c public <target> IPADv2-MIB::ipadFrPortRxInvAlmThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.1.1.1.5.1 snmpget -v2c -c public <target> IPADv2-MIB::ipadFrPortRxInvAlmThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.1.1.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.1 | ipadFrPort | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.1.1 | ipadFrPortTable | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.1.1.1 | ipadFrPortTableEntry | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.1.1.1.5 | ipadFrPortRxInvAlmThreshold | IPADv2-MIB |