All MIBs › IP-MIB › ipv4InterfaceEnableStatus
ipv4InterfaceEnableStatus
Module: IP-MIB
OID (symbolic): IP-MIB::ipv4InterfaceEnableStatus
OID (numeric): 1.3.6.1.2.1.4.28.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The indication of whether IPv4 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv4 stack. The IF-MIB should be used to control the state of the interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.4.28.1.3 snmpwalk -v2c -c public <target> IP-MIB::ipv4InterfaceEnableStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.4.28.1.3.1 snmpget -v2c -c public <target> IP-MIB::ipv4InterfaceEnableStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.4.28.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ipv4InterfaceEnableStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.4 | ip | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.4.28 | ipv4InterfaceTable | IP-MIB |
| 1.3.6.1.2.1.4.28.1 | ipv4InterfaceEntry | IP-MIB |
| 1.3.6.1.2.1.4.28.1.3 | ipv4InterfaceEnableStatus | IP-MIB |