All MIBs › INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB › switchIfSpeed
switchIfSpeed
Module: INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
OID (symbolic): INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfSpeed
OID (numeric): 1.3.6.1.4.1.343.2.19.1.2.10.203.3.1.5
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and switchIfHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
What is switchIfSpeed?
An estimate of the interface's current bandwidth in bits per second; if the true speed exceeds the 4,294,967,295 bps ceiling this counter can represent, it reports that maximum and switchIfHighSpeed must be read instead for the real value. On a 10G+ switch port, an admin should therefore check switchIfHighSpeed rather than trusting this field alone.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.2.19.1.2.10.203.3.1.5 snmpwalk -v2c -c public <target> INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.2.19.1.2.10.203.3.1.5.1 snmpget -v2c -c public <target> INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfSpeed.1
Start monitoring Intel Multi-Flex Server blade chassis (embedded switch fabric module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfSpeed OID value, configure state conditions and alerts, and monitor any Intel Multi-Flex Server blade chassis (embedded switch fabric module) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.2 | products | AOLAN-MIB |
| 1.3.6.1.4.1.343.2.19 | modularsystems | INTELCORPORATION-MULTI-FLEX-SERVER-REG |
| 1.3.6.1.4.1.343.2.19.1 | multiFlexServer | INTELCORPORATION-MULTI-FLEX-SERVER-REG |
| 1.3.6.1.4.1.343.2.19.1.2 | components | INTELCORPORATION-MULTI-FLEX-SERVER-REG |
| 1.3.6.1.4.1.343.2.19.1.2.10 | chassis | INTELCORPORATION-MULTI-FLEX-SERVER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.2.19.1.2.10.203 | switches | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.3 | switchIfTable | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.3.1 | switchIfEntry | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.3.1.5 | switchIfSpeed | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |