INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB :: switchIfHighSpeed

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB › switchIfHighSpeed

switchIfHighSpeed

Module: INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB

OID (symbolic): INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfHighSpeed

OID (numeric): 1.3.6.1.4.1.343.2.19.1.2.10.203.4.1.15

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

What is switchIfHighSpeed?

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second, accurate to within about 500,000 bps of the true speed; use this instead of switchIfSpeed for interfaces at or above the 32-bit counter's ~4.29 Gbps ceiling. On a 10GbE switch port this would read approximately 10000.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.2.19.1.2.10.203.4.1.15
snmpwalk -v2c -c public <target> INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfHighSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.343.2.19.1.2.10.203.4.1.15.1
snmpget -v2c -c public <target> INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfHighSpeed.1

Start monitoring Intel Multi-Flex Server blade chassis (embedded switch fabric module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchIfHighSpeed OID value, configure state conditions and alerts, and monitor any Intel Multi-Flex Server blade chassis (embedded switch fabric module) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.343intelAOLAN-MIB
1.3.6.1.4.1.343.2productsAOLAN-MIB
1.3.6.1.4.1.343.2.19modularsystemsINTELCORPORATION-MULTI-FLEX-SERVER-REG
1.3.6.1.4.1.343.2.19.1multiFlexServerINTELCORPORATION-MULTI-FLEX-SERVER-REG
1.3.6.1.4.1.343.2.19.1.2componentsINTELCORPORATION-MULTI-FLEX-SERVER-REG
1.3.6.1.4.1.343.2.19.1.2.10chassisINTELCORPORATION-MULTI-FLEX-SERVER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.343.2.19.1.2.10.203switchesINTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
1.3.6.1.4.1.343.2.19.1.2.10.203.4switchIfXTableINTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
1.3.6.1.4.1.343.2.19.1.2.10.203.4.1switchIfXEntryINTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
1.3.6.1.4.1.343.2.19.1.2.10.203.4.1.15switchIfHighSpeedINTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB