All MIBs › INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB › switchEtherStatsJabbers
switchEtherStatsJabbers
Module: INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB
OID (symbolic): INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchEtherStatsJabbers
OID (numeric): 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.12
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
What is switchEtherStatsJabbers?
Counts packets longer than 1518 octets that also failed the FCS/alignment check, using a broader definition of 'jabber' (20-150ms range) than the strict IEEE 802.3 timing definition. Consistent jabber counts usually point to a faulty NIC stuck transmitting an over-length, corrupted frame.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.12 snmpwalk -v2c -c public <target> INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchEtherStatsJabbers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.12.1 snmpget -v2c -c public <target> INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchEtherStatsJabbers.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> switchEtherStatsJabbers.1
Start monitoring Intel Multi-Flex Server blade chassis (embedded switch fabric module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB::switchEtherStatsJabbers OID value, configure state conditions and alerts, and monitor any Intel Multi-Flex Server blade chassis (embedded switch fabric module) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.2 | products | AOLAN-MIB |
| 1.3.6.1.4.1.343.2.19 | modularsystems | INTELCORPORATION-MULTI-FLEX-SERVER-REG |
| 1.3.6.1.4.1.343.2.19.1 | multiFlexServer | INTELCORPORATION-MULTI-FLEX-SERVER-REG |
| 1.3.6.1.4.1.343.2.19.1.2 | components | INTELCORPORATION-MULTI-FLEX-SERVER-REG |
| 1.3.6.1.4.1.343.2.19.1.2.10 | chassis | INTELCORPORATION-MULTI-FLEX-SERVER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.2.19.1.2.10.203 | switches | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5 | switchEtherStatsTable | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1 | switchEtherStatsEntry | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |
| 1.3.6.1.4.1.343.2.19.1.2.10.203.5.1.12 | switchEtherStatsJabbers | INTELCORPORATION-MULTI-FLEX-SERVER-SWITCH-MIB |