INTEL-ES400-MIB :: es400ChassisInfoFrontPanelLedStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › INTEL-ES400-MIB › es400ChassisInfoFrontPanelLedStatus

es400ChassisInfoFrontPanelLedStatus

Module: INTEL-ES400-MIB

OID (symbolic): INTEL-ES400-MIB::es400ChassisInfoFrontPanelLedStatus

OID (numeric): 1.3.6.1.4.1.343.6.17.2.1.5

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This object is a set of LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is status LED. The other octets following the second octets are the port LED. Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.

There is one byte per LED.

The most significant bit is used for blink/solid: Off = The LED is lit permanently. On = The LED blinks.

The three least significant bits are used for color: 1 = not lit, 2 = green, 3 = yellow,(orange) 4 = blue, 5 = red, 0+6+7 not used

The four remaining bits are currently unused and must be 0.

What is es400ChassisInfoFrontPanelLedStatus?

A packed byte string describing the state of every front-panel LED (power, status, then per-port link/activity and speed LEDs), encoding blink-vs-solid and color for each - mainly useful for building a remote 'virtual front panel' rather than reading by hand.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.17.2.1.5
snmpwalk -v2c -c public <target> INTEL-ES400-MIB::es400ChassisInfoFrontPanelLedStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.17.2.1.5.1
snmpget -v2c -c public <target> INTEL-ES400-MIB::es400ChassisInfoFrontPanelLedStatus.1

Start monitoring Intel Express 400 series stackable Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-ES400-MIB::es400ChassisInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any Intel Express 400 series stackable Ethernet switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.343intelAOLAN-MIB
1.3.6.1.4.1.343.6mib2extEXPRESSGS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.343.6.17es400INTEL-ES400-MIB
1.3.6.1.4.1.343.6.17.2es400ChassisINTEL-ES400-MIB
1.3.6.1.4.1.343.6.17.2.1es400ChassisInfoINTEL-ES400-MIB
1.3.6.1.4.1.343.6.17.2.1.5es400ChassisInfoFrontPanelLedStatusINTEL-ES400-MIB