IMDM-MIB :: imdmCcAsyncPPP

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › IMDM-MIB › imdmCcAsyncPPP

imdmCcAsyncPPP

Module: IMDM-MIB

OID (symbolic): IMDM-MIB::imdmCcAsyncPPP

OID (numeric): 1.3.6.1.4.1.429.1.19.1.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to disable/enable async PPP/ sync PPP conversion. This object corresponds to S register S68 bit 2. Default = enable(1).

What is imdmCcAsyncPPP?

Enables (1, default) or disables (2) async-to-sync PPP conversion for this modem, corresponding to S-register S68 bit 2. An admin disables this if the connected equipment already speaks synchronous PPP and conversion isn't needed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.19.1.1.1.7
snmpwalk -v2c -c public <target> IMDM-MIB::imdmCcAsyncPPP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.19.1.1.1.7.1
snmpget -v2c -c public <target> IMDM-MIB::imdmCcAsyncPPP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.1.19.1.1.1.7.1 i <value>

Start monitoring US Robotics/3Com Total Control-style NAS (Intelligent Modem/Device Manager) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IMDM-MIB::imdmCcAsyncPPP OID value, configure state conditions and alerts, and monitor any US Robotics/3Com Total Control-style NAS (Intelligent Modem/Device Manager) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrANIC-MIB
1.3.6.1.4.1.429.1nasANIC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.1.19imdmIMDM-MIB
1.3.6.1.4.1.429.1.19.1imdmCcIMDM-MIB
1.3.6.1.4.1.429.1.19.1.1imdmCcTableIMDM-MIB
1.3.6.1.4.1.429.1.19.1.1.1imdmCcEntryIMDM-MIB
1.3.6.1.4.1.429.1.19.1.1.1.7imdmCcAsyncPPPIMDM-MIB