All MIBs › IEEE802dot11-MIB › dot11TxPowerLevel2
dot11TxPowerLevel2
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11TxPowerLevel2
OID (numeric): 1.2.840.10036.4.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The transmit output power for LEVEL2 in mW.
What is dot11TxPowerLevel2?
The transmit output power, in mW, configured for power level 2. It's one of several selectable discrete power steps an admin can switch between via dot11CurrentTxPowerLevel to tune coverage versus interference.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.4.3.1.3 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11TxPowerLevel2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.4.3.1.3.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11TxPowerLevel2.1
Start monitoring Vendor-neutral IEEE 802.11 standard (wireless stations and access points) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE802dot11-MIB::dot11TxPowerLevel2 OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.11 standard (wireless stations and access points) from a single console.
OID Breakdown
Upper-level ancestors (2 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | GB15629dot11-WAPI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.4 | dot11phy | IEEE802dot11-MIB |
| 1.2.840.10036.4.3 | dot11PhyTxPowerTable | IEEE802dot11-MIB |
| 1.2.840.10036.4.3.1 | dot11PhyTxPowerEntry | IEEE802dot11-MIB |
| 1.2.840.10036.4.3.1.3 | dot11TxPowerLevel2 | IEEE802dot11-MIB |