All MIBs › IEEE802dot11-MIB › dot11TIThreshold
dot11TIThreshold
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11TIThreshold
OID (numeric): 1.2.840.10036.4.11.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The Threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold.
What is dot11TIThreshold?
The RSSI threshold the OFDM PHY uses to detect a busy medium; CCA reports the channel busy once received signal strength exceeds this value. Admins tune this to adjust how sensitive the radio's clear-channel assessment is to nearby RF energy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.4.11.1.2 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11TIThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.4.11.1.2.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11TIThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10036.4.11.1.2.1 i <value>
Start monitoring Vendor-neutral IEEE 802.11 standard (wireless stations and access points) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE802dot11-MIB::dot11TIThreshold OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.11 standard (wireless stations and access points) from a single console.
OID Breakdown
Upper-level ancestors (2 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | GB15629dot11-WAPI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.4 | dot11phy | IEEE802dot11-MIB |
| 1.2.840.10036.4.11 | dot11PhyOFDMTable | IEEE802dot11-MIB |
| 1.2.840.10036.4.11.1 | dot11PhyOFDMEntry | IEEE802dot11-MIB |
| 1.2.840.10036.4.11.1.2 | dot11TIThreshold | IEEE802dot11-MIB |