All MIBs › IEEE802dot11-MIB › dot11QAPEDCATableTXOPLimit
dot11QAPEDCATableTXOPLimit
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11QAPEDCATableTXOPLimit
OID (numeric): 1.2.840.10036.2.5.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute shall specify the maximum number of microseconds of an EDCA TXOP for a given AC at the QAP. The default value for this attribute is 1) 0 for all PHYs, if dot11QAPEDCATableIndex is 1 or 2; this implies that the sender can send one MSDU in an EDCA TXOP, 2) 3008 microseconds for IEEE 802.11a/g PHY and 6016 microseconds for IEEE 802.11b PHY, if dot11QAPEDCATableIndex is 3, 3) 1504 microseconds for IEEE 802.11a/g PHY and 3264 microseconds for IEEE 802.11b PHY, if dot11QAPEDCATableIndex is 4.
What is dot11QAPEDCATableTXOPLimit?
Sets the maximum transmission-opportunity duration, in microseconds, the QAP may use per EDCA TXOP for the Access Category identified by dot11QAPEDCATableIndex. It controls how many frames the AP can burst out per opportunity for each priority class of downstream traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.2.5.1.5 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11QAPEDCATableTXOPLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.2.5.1.5.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11QAPEDCATableTXOPLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10036.2.5.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dot11QAPEDCATableTXOPLimit.1
Start monitoring Vendor-neutral IEEE 802.11 standard (wireless stations and access points) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE802dot11-MIB::dot11QAPEDCATableTXOPLimit OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.11 standard (wireless stations and access points) from a single console.
OID Breakdown
Upper-level ancestors (2 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | GB15629dot11-WAPI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.2 | dot11mac | IEEE802dot11-MIB |
| 1.2.840.10036.2.5 | dot11QAPEDCATable | IEEE802dot11-MIB |
| 1.2.840.10036.2.5.1 | dot11QAPEDCATableEntry | IEEE802dot11-MIB |
| 1.2.840.10036.2.5.1.5 | dot11QAPEDCATableTXOPLimit | IEEE802dot11-MIB |