All MIBs › IEEE802dot11-MIB › dot11LongRetryLimit
dot11LongRetryLimit
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11LongRetryLimit
OID (numeric): 1.2.840.10036.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 4.
What is dot11LongRetryLimit?
This object specifies the maximum number of transmission attempts for IEEE 802.11 frames longer than the RTS threshold before the sender gives up and reports a failure. The default value is 4 retries; valid range is 1-255. Wireless LAN administrators tune this parameter to balance throughput (fewer retries means faster failure detection) against reliability (more retries help with marginal RF conditions).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.2.1.1.4 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11LongRetryLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.2.1.1.4.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11LongRetryLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10036.2.1.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.2 | dot11mac | IEEE802dot11-MIB |
| 1.2.840.10036.2.1 | dot11OperationTable | IEEE802dot11-MIB |
| 1.2.840.10036.2.1.1 | dot11OperationEntry | IEEE802dot11-MIB |
| 1.2.840.10036.2.1.1.4 | dot11LongRetryLimit | IEEE802dot11-MIB |