All MIBs › IEEE802dot11-MIB › dot11HopTime
dot11HopTime
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11HopTime
OID (numeric): 1.2.840.10036.4.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The time in microseconds for the PMD to change from channel 2 to channel 80
What is dot11HopTime?
A fixed, read-only value giving the time in microseconds the PMD needs to switch from channel 2 to channel 80 in a frequency-hopping PHY. It's a hardware characteristic used in FHSS timing calculations rather than something an admin configures.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.4.4.1.1 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11HopTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.4.4.1.1.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11HopTime.1
Start monitoring Vendor-neutral IEEE 802.11 standard (wireless stations and access points) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE802dot11-MIB::dot11HopTime OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.11 standard (wireless stations and access points) from a single console.
OID Breakdown
Upper-level ancestors (2 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | GB15629dot11-WAPI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.4 | dot11phy | IEEE802dot11-MIB |
| 1.2.840.10036.4.4 | dot11PhyFHSSTable | IEEE802dot11-MIB |
| 1.2.840.10036.4.4.1 | dot11PhyFHSSEntry | IEEE802dot11-MIB |
| 1.2.840.10036.4.4.1.1 | dot11HopTime | IEEE802dot11-MIB |