All MIBs › IEEE802dot11-MIB › dot11HopOffset
dot11HopOffset
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11HopOffset
OID (numeric): 1.2.840.10036.4.4.1.16
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The next position in the hopping set.
What is dot11HopOffset?
Specifies the next position in the FHSS hopping set the radio will use. It's an internal state value for frequency-hopping sequencing in legacy FHSS deployments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.4.4.1.16 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11HopOffset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.4.4.1.16.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11HopOffset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10036.4.4.1.16.1 i <value>
Start monitoring Vendor-neutral IEEE 802.11 standard (wireless stations and access points) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE802dot11-MIB::dot11HopOffset OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.11 standard (wireless stations and access points) from a single console.
OID Breakdown
Upper-level ancestors (2 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | GB15629dot11-WAPI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.4 | dot11phy | IEEE802dot11-MIB |
| 1.2.840.10036.4.4 | dot11PhyFHSSTable | IEEE802dot11-MIB |
| 1.2.840.10036.4.4.1 | dot11PhyFHSSEntry | IEEE802dot11-MIB |
| 1.2.840.10036.4.4.1.16 | dot11HopOffset | IEEE802dot11-MIB |