All MIBs › IEEE802dot11-MIB › dot11HopAlgorithmAdopted
dot11HopAlgorithmAdopted
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11HopAlgorithmAdopted
OID (numeric): 1.2.840.10036.4.4.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute, indicates which of the algorithms will be used to generate the Hopping Patterns. Valid Values are: 0 - hopping patterns as defined in clause 14 of the current version of IEEE Std 802.11 1 - hop index method (with or without table) 2 - HCC/EHCC method
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.4.4.1.12 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11HopAlgorithmAdopted
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.4.4.1.12.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11HopAlgorithmAdopted.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10036.4.4.1.12.1 i <value>
Start monitoring Vendor-neutral IEEE 802.11 standard (wireless stations and access points) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE802dot11-MIB::dot11HopAlgorithmAdopted OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.11 standard (wireless stations and access points) from a single console.
OID Breakdown
Upper-level ancestors (1 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.4 | dot11phy | IEEE802dot11-MIB |
| 1.2.840.10036.4.4 | dot11PhyFHSSTable | IEEE802dot11-MIB |
| 1.2.840.10036.4.4.1 | dot11PhyFHSSEntry | IEEE802dot11-MIB |
| 1.2.840.10036.4.4.1.12 | dot11HopAlgorithmAdopted | IEEE802dot11-MIB |