All MIBs › IEEE802dot11-MIB › dot11AssociationResponseTimeOut
dot11AssociationResponseTimeOut
Module: IEEE802dot11-MIB
OID (symbolic): IEEE802dot11-MIB::dot11AssociationResponseTimeOut
OID (numeric): 1.2.840.10036.1.1.1.14
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
This attribute shall specify the number of TU that a requesting STA should wait for a response to a transmitted association-request MMPDU.
What is dot11AssociationResponseTimeOut?
This object specifies the time interval (in TU - Time Units) that a wireless station should wait to receive a response after sending an association request frame to an access point. The value controls how long the station will wait before timing out and retrying the association process. An operator configuring wireless network parameters would adjust this value to balance responsiveness with tolerance for network delays.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10036.1.1.1.14 snmpwalk -v2c -c public <target> IEEE802dot11-MIB::dot11AssociationResponseTimeOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10036.1.1.1.14.1 snmpget -v2c -c public <target> IEEE802dot11-MIB::dot11AssociationResponseTimeOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10036.1.1.1.14.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10036 | ieee802dot11 | IEEE802dot11-MIB |
| 1.2.840.10036.1 | dot11smt | IEEE802dot11-MIB |
| 1.2.840.10036.1.1 | dot11StationConfigTable | IEEE802dot11-MIB |
| 1.2.840.10036.1.1.1 | dot11StationConfigEntry | IEEE802dot11-MIB |
| 1.2.840.10036.1.1.1.14 | dot11AssociationResponseTimeOut | IEEE802dot11-MIB |