IEEE8021-CN-MIB :: ieee8021CnComPriAutoAltPri

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › IEEE8021-CN-MIB › ieee8021CnComPriAutoAltPri

ieee8021CnComPriAutoAltPri

Module: IEEE8021-CN-MIB

OID (symbolic): IEEE8021-CN-MIB::ieee8021CnComPriAutoAltPri

OID (numeric): 1.3.111.2.802.1.1.18.1.3.1.5

Node type: OBJECT-TYPE

Type: IEEE8021PriorityValue

Access: read-only

Description: The Congestion Notification Priority Value to which an incoming frame can be mapped, in spite of what the Priority Regereration Table says, if 1) Congestion Notification is enabled, 2) the CND defense mode of the port is cptEdge, and 3) ieee8021CnComPriDefModeChoice contains the value cpcAuto (2).

The value of this object is the next lower priority value than this row's ieee8021CnComPriPriority that is not a CNPV, or the next higher non-CNPV, if all lower values are CNPVs.

The value of this object, and any consequent priority regeneration, is automatically updated by the managed system whenever a row in the ieee8021CnCompntPriTable is created or deleted. The value of this object is not dependent upon whether congestion notification is enabled or disabled for any priority or for the whole Bridge component or end station; it depends only upon whether the ieee8021CnCompntPriTable row exists.

What is ieee8021CnComPriAutoAltPri?

The automatically computed alternate priority for this CNPV at the edge, used when ieee8021CnComPriDefModeChoice is set to cpcAuto; the system derives it as the next lower non-CNPV priority (or next higher, if none lower exist) and recalculates it whenever rows are added or removed from the priority table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.18.1.3.1.5
snmpwalk -v2c -c public <target> IEEE8021-CN-MIB::ieee8021CnComPriAutoAltPri

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.111.2.802.1.1.18.1.3.1.5.1
snmpget -v2c -c public <target> IEEE8021-CN-MIB::ieee8021CnComPriAutoAltPri.1

Start monitoring data center Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-CN-MIB::ieee8021CnComPriAutoAltPri OID value, configure state conditions and alerts, and monitor any data center Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (3 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.111.2.802.1.1ieee802dot1mibsIEEE8021-TC-MIB
Numeric OIDNameModule
1.3.111.2.802.1.1.18ieee8021CnMibIEEE8021-CN-MIB
1.3.111.2.802.1.1.18.1ieee8021CnMIBObjectsIEEE8021-CN-MIB
1.3.111.2.802.1.1.18.1.3ieee8021CnCompntPriTableIEEE8021-CN-MIB
1.3.111.2.802.1.1.18.1.3.1ieee8021CnCompntPriEntryIEEE8021-CN-MIB
1.3.111.2.802.1.1.18.1.3.1.5ieee8021CnComPriAutoAltPriIEEE8021-CN-MIB