All MIBs › IBMHPRROUTETEST-MIB › ibmHprRtGlobeNameTrigger
ibmHprRtGlobeNameTrigger
Module: IBMHPRROUTETEST-MIB
OID (symbolic): IBMHPRROUTETEST-MIB::ibmHprRtGlobeNameTrigger
OID (numeric): 1.3.6.1.4.1.2.5.10.4.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object is used to trigger an HPR route test of the physical path of an existing or non-existing RTP Connection. The names will be used to generate a HPR Route which may or may not match an existing RTP Connection; but must be reside on a current or potential RTP Connection endpoint node. The format of this object is: netid.lu-name.mode-name, where
- netid: 1-8 octets. - period: 1 octet. - lu-name: 1-8 octets. - period: 1 octet. - mode-name: 1-8 octets.
What is ibmHprRtGlobeNameTrigger?
ibmHprRtGlobeNameTrigger is a write-triggered DisplayString that starts an HPR route test using netid.lu-name.mode-name, generating a route that may or may not correspond to an existing RTP connection, as long as the target node is a current or potential RTP endpoint. Admins use this when they want to test HPR reachability to a specific destination LU/mode even if no live connection currently exists to it. For example, an admin verifying HPR connectivity ahead of provisioning a new session might set ibmHprRtGlobeNameTrigger to 'NETA.LUB.MODE1' to trigger a proactive route test to that destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.5.10.4.1.2 snmpwalk -v2c -c public <target> IBMHPRROUTETEST-MIB::ibmHprRtGlobeNameTrigger
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.5.10.4.1.2.1 snmpget -v2c -c public <target> IBMHPRROUTETEST-MIB::ibmHprRtGlobeNameTrigger.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.5.10.4.1.2.1 s <value>
Start monitoring IBM 6611 Network Processor nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBMHPRROUTETEST-MIB::ibmHprRtGlobeNameTrigger OID value, configure state conditions and alerts, and monitor any IBM 6611 Network Processor nodes from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.5 | ibmArchitecture | IBM-FEATURE-ACTIVATION-MIB |
| 1.3.6.1.4.1.2.5.10 | hpr | IBMHPRNCL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.5.10.4 | ibmHprRouteTest | IBMHPRROUTETEST-MIB |
| 1.3.6.1.4.1.2.5.10.4.1 | ibmHprRtGlobe | IBMHPRROUTETEST-MIB |
| 1.3.6.1.4.1.2.5.10.4.1.2 | ibmHprRtGlobeNameTrigger | IBMHPRROUTETEST-MIB |