IBM-TS3500-MIBv1 :: ibm3584Trap252

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › IBM-TS3500-MIBv1 › ibm3584Trap252

ibm3584Trap252

Module: IBM-TS3500-MIBv1

OID (symbolic): IBM-TS3500-MIBv1::ibm3584Trap252

OID (numeric): 1.3.6.1.4.1.4484.1.0.252

Node type: NOTIFICATION-TYPE

Description: Trap for drive TapeAlert 052. Flag: Tape system area write failure. Type: C Cause: Write errors while writing the system log on unload. Required host message: The tape cartridge that was previously unloaded could not write it's system area successfully. Copy the data to another tape cartridge, then discard the old cartridge.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' IBM-TS3500-MIBv1::ibm3584Trap252
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.4484.1.0.252

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:49802->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (269195914) 31 days, 3:45:59.14
  SNMPv2-MIB::snmpTrapOID.0 = OID: IBM-TS3500-MIBv1::ibm3584Trap252

Start monitoring IBM TS3500 automated tape library with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-TS3500-MIBv1::ibm3584Trap252 OID value, configure state conditions and alerts, and monitor any IBM TS3500 automated tape library from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4484ibm3584v1IBM-TS3500-MIBv1
1.3.6.1.4.1.4484.1ibm3584v1MIBIBM-TS3500-MIBv1
1.3.6.1.4.1.4484.1.0.252ibm3584Trap252IBM-TS3500-MIBv1