All MIBs › IBM-RXR-MIB › rxr1dTpFdbStatus
rxr1dTpFdbStatus
Module: IBM-RXR-MIB
OID (symbolic): IBM-RXR-MIB::rxr1dTpFdbStatus
OID (numeric): 1.3.6.1.4.1.2.6.26.1.4.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this entry. The meanings of the values are:
other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of rxr1dTpFdbPort, nor an entry in the rxr1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of rxr1dTpFdbAddress are being forwarded.
invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table.
learned(3) : the value of the corresponding instance of rxr1dTpFdbPort was learned, and is being used.
self(4) : the value of the corresponding instance of rxr1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of rxr1dTpFdbPort indicates which of the bridge's ports has this address.
mgmt(5) : the value of the corresponding instance of rxr1dTpFdbAddress is also the value of an existing instance of rxr1dStaticAddress.
What is rxr1dTpFdbStatus?
Describes the nature of this forwarding-database entry: learned(3) means the port was dynamically discovered from traffic and is in active use, self(4) means the address is one of the bridge's own port addresses, mgmt(5) means it matches a statically configured entry in rxr1dStaticTable, invalid(2) means the entry has aged out but hasn't been purged yet, and other(1) covers cases determined by some other mechanism entirely. An admin checks this to distinguish a device's dynamically-learned location from a statically pinned one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.26.1.4.3.1.3 snmpwalk -v2c -c public <target> IBM-RXR-MIB::rxr1dTpFdbStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.26.1.4.3.1.3.1 snmpget -v2c -c public <target> IBM-RXR-MIB::rxr1dTpFdbStatus.1
Start monitoring IBM RouteXpander router/bridge (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-RXR-MIB::rxr1dTpFdbStatus OID value, configure state conditions and alerts, and monitor any IBM RouteXpander router/bridge (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.26 | routeXpander | IBM-RXR-MIB |
| 1.3.6.1.4.1.2.6.26.1 | rxr1dBridge | IBM-RXR-MIB |
| 1.3.6.1.4.1.2.6.26.1.4 | rxr1dTp | IBM-RXR-MIB |
| 1.3.6.1.4.1.2.6.26.1.4.3 | rxr1dTpFdbTable | IBM-RXR-MIB |
| 1.3.6.1.4.1.2.6.26.1.4.3.1 | rxr1dTpFdbEntry | IBM-RXR-MIB |
| 1.3.6.1.4.1.2.6.26.1.4.3.1.3 | rxr1dTpFdbStatus | IBM-RXR-MIB |