All MIBs › IBM-LAN-EMULATION-EXTENSION-MIB › ibmSEAtmIfNumber
ibmSEAtmIfNumber
Module: IBM-LAN-EMULATION-EXTENSION-MIB
OID (symbolic): IBM-LAN-EMULATION-EXTENSION-MIB::ibmSEAtmIfNumber
OID (numeric): 1.3.6.1.4.1.2.5.8.4.1.2.1.1
Node type: OBJECT-TYPE
Type: IfIndexOrZero
Access: read-write
Description: The ATM interface number the Super ELAN (SE) bridging function is associated with. This number is used to determine the NETWORK ID. A SE Bridge (SEB) may span ATM adapters but they have to be on the same network, as specified by the Network ID. The specific requirement is that the LECs in the Super ELAN can establish a Data Direct VCC.
The Network ID is an ATM configuration parameter that is required to allow Data Direct VCC's to be established.
The value of this object must match an existing value in the ifTable. This object is set to zero when the ATM interface is not specified and the agent must determine itself which ATM interface it is to use. If the agent can not determine a default ATM interface an error should be returned by the agent.
What is ibmSEAtmIfNumber?
The ATM interface (ifIndex) this Super ELAN Bridge instance is associated with, which determines the network ID used to establish Data Direct VCCs between its member LAN Emulation Clients; a value of 0 tells the agent to pick a default ATM interface itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.5.8.4.1.2.1.1 snmpwalk -v2c -c public <target> IBM-LAN-EMULATION-EXTENSION-MIB::ibmSEAtmIfNumber
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.5.8.4.1.2.1.1.1 snmpget -v2c -c public <target> IBM-LAN-EMULATION-EXTENSION-MIB::ibmSEAtmIfNumber.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.5.8.4.1.2.1.1.1 s <value>
Start monitoring IBM ATM LAN Emulation server (LECS/LES/BUS instance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-LAN-EMULATION-EXTENSION-MIB::ibmSEAtmIfNumber OID value, configure state conditions and alerts, and monitor any IBM ATM LAN Emulation server (LECS/LES/BUS instance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.5 | ibmArchitecture | IBM-FEATURE-ACTIVATION-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.5.8 | lanEmulation | IBM-LAN-EMULATION-EXTENSION-MIB |
| 1.3.6.1.4.1.2.5.8.4 | ibmLeClientX | IBM-LAN-EMULATION-EXTENSION-MIB |
| 1.3.6.1.4.1.2.5.8.4.1 | ibmSuperELAN | IBM-LAN-EMULATION-EXTENSION-MIB |
| 1.3.6.1.4.1.2.5.8.4.1.2 | ibmSEBridgeConfigTable | IBM-LAN-EMULATION-EXTENSION-MIB |
| 1.3.6.1.4.1.2.5.8.4.1.2.1 | ibmSEBridgeConfigEntry | IBM-LAN-EMULATION-EXTENSION-MIB |
| 1.3.6.1.4.1.2.5.8.4.1.2.1.1 | ibmSEAtmIfNumber | IBM-LAN-EMULATION-EXTENSION-MIB |