All MIBs › IBM-INTERFACE-MIB › ibminterfaceClearOutMulticastPkts
ibminterfaceClearOutMulticastPkts
Module: IBM-INTERFACE-MIB
OID (symbolic): IBM-INTERFACE-MIB::ibminterfaceClearOutMulticastPkts
OID (numeric): 1.3.6.1.4.1.2.6.119.4.17.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When SET to a value of clear(1), the counter of multicast packets sent over this interface is reset.
When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.
What is ibminterfaceClearOutMulticastPkts?
This read-write trigger object resets the counter of multicast packets sent over this interface when set to clear(1); reading it always returns noaction(0) since it exists purely to trigger an action, not to report state. Admins use this to zero out the outbound multicast packet counter for an interface before a new measurement window. For example, setting it to clear(1) resets the interface's transmitted-multicast-packet counter to zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.8 snmpwalk -v2c -c public <target> IBM-INTERFACE-MIB::ibminterfaceClearOutMulticastPkts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.8.1 snmpget -v2c -c public <target> IBM-INTERFACE-MIB::ibminterfaceClearOutMulticastPkts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.8.1 i <value>
Start monitoring IBM networking equipment (routers/switches) with IF-MIB counter-reset extension with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-INTERFACE-MIB::ibminterfaceClearOutMulticastPkts OID value, configure state conditions and alerts, and monitor any IBM networking equipment (routers/switches) with IF-MIB counter-reset extension from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.119 | ibmIROC | IBMIROCDIALOUT-MIB |
| 1.3.6.1.4.1.2.6.119.4 | ibmIROCrouting | IBMIROCDIALOUT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.119.4.17 | ibmIROCroutinginterface | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1 | ibminterfaceClearTable | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1.1 | ibminterfaceClearEntry | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1.1.8 | ibminterfaceClearOutMulticastPkts | IBM-INTERFACE-MIB |