All MIBs › IBM-INTERFACE-MIB › ibminterfaceClearOutErrors
ibminterfaceClearOutErrors
Module: IBM-INTERFACE-MIB
OID (symbolic): IBM-INTERFACE-MIB::ibminterfaceClearOutErrors
OID (numeric): 1.3.6.1.4.1.2.6.119.4.17.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When SET to a value of clear(1), the counters for all types of output errors are reset.
When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.
What is ibminterfaceClearOutErrors?
This read-write trigger object resets the counters for all types of output errors on this interface when set to clear(1); reading it always returns noaction(0) since it exists purely to trigger an action, not to report state. Admins use this to clear accumulated outbound error counts before troubleshooting a recurring transmission error. For example, setting it to clear(1) zeroes out all outbound error counters so new errors can be tracked from a clean baseline.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.9 snmpwalk -v2c -c public <target> IBM-INTERFACE-MIB::ibminterfaceClearOutErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.9.1 snmpget -v2c -c public <target> IBM-INTERFACE-MIB::ibminterfaceClearOutErrors.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.9.1 i <value>
Start monitoring IBM networking equipment (routers/switches) with IF-MIB counter-reset extension with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-INTERFACE-MIB::ibminterfaceClearOutErrors OID value, configure state conditions and alerts, and monitor any IBM networking equipment (routers/switches) with IF-MIB counter-reset extension from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.119 | ibmIROC | IBMIROCDIALOUT-MIB |
| 1.3.6.1.4.1.2.6.119.4 | ibmIROCrouting | IBMIROCDIALOUT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.119.4.17 | ibmIROCroutinginterface | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1 | ibminterfaceClearTable | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1.1 | ibminterfaceClearEntry | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1.1.9 | ibminterfaceClearOutErrors | IBM-INTERFACE-MIB |